Freudenthal CS-60 Comfort Stall

• The heaviest stall comfort stall in the industry
• Constructed of high tensile 2 3/8 - 10 gauge tubing
• Supported by a 2 3/8 curb post reinforced with a 3" x 18" long (5 gauge) steel rust guard with 12" poly-vinyl rust shield
• Includes neck rail pipe, stall chain with push in snap, stall chain hanger clamp and a 6 1/2 lb top rail clamp
• Stall frame clamps to post for easy installation
• Durability and cow comfort was the main focus in the design of this stall

Freudenthal CS-55 Comfort Stall

• CS-55 1-Legged Comfort Stalls are constructed of our heavy duty 1 9/10" 9 gauge high tensile strength triple coated galvanized steel
• Stalls come standard with a heavy steel rust guard and a 28" solid shaft inside post
• Gussets are welded to each side of the posts for added strength
• CS-55 Comfort Stall has a freestall design constructed out of 1 9/10" 9 gauge triple galvanized steel
• Includes 48" of top rail pipe, top rail clamp, stall chain with push in snap, and stall chain clamp
• Total stall weight is 90 lbs.

Freudenthal CS-50 Comfort Stall

• TCS-50 Comfort Stalls are constructed of our heavy duty high tensile strength 1 9/10" 9 gauge triple coated galvanized steel
• Comes standard with ridged polyethylene rust shields on all pipes that go into the concrete and 28" solid shaft welded in front post and 20" shaft in rear post
• CS-50 Comfort Stall has a freestall design constructed out of 1 9/10" high tensile strength 9 gauge triple galvanized steel, polyethene rust shields and solid shaft in posts
• Includes 4' top rail, top rail clamp, stall chain with push in snap, stall chain clamp and fillers
• Total stall weight is 100 lbs.

Freudenthal CS-40 Comfort Stall

These Comfort Stalls are constructed of our heavy duty high tensile strength 1 5/8" 10 gauge triple coated galvanized steel. They come standard with ridged polyethylene rust shields on all pipes that go into concrete and 20" solid shafts welded in front and rear posts.

• CS-40: Comfort Stall includes 4' top rail, top rail clamp, stall chain with push in snap, stall chain clamp, triple bend divider with clamp and 20" solid shaft
• CS-40-D: Comfort Stall comes complete with double bend divider and 4" x 1 5/8" column clamp
• CS-40-ES: Comfort Stall end section is a full divider, no top rail or chain
• CS-40-P: P end section is a post with front loop and clamp

Freudenthal CS-30 Comfort Stall

CS-30 Comfort Stalls are constructed of our heavy duty high tensile strength 1 5/8" 10 gauge triple coated galvanized steel. They come standard with ridged polyethylene rust shields on all pipes that go into the concrete and 20" solid shafts welded in rear posts. Note: Solid shaft in front post is optional.

• CS-30: Comfort Stall comes complete with triple bend divider with 4' top rail, top rail clamp, stall chain with push in snap, stall chain clamp
• CS-30-D: Comfort Stall comes complete with double bend divider and 4" x 1 5/8" column clamp
• CS-30-ES: Comfort Stall end section is a full divider, no top rail or chain
• CS-30-P: P end section is a post with front loop and clamp

Freudenthal CS-21 Comfort Stall

• CS-21 Super Economy Stall with divider control is constructed of our heavy duty tensile strength 1 5/8" 10 gauge triple coated galvanized steel. They come standard with a rigid polyethylene rust shield and 20" solid shaft in triple bend divider. Note: Solid shaft in front post is optional
• CS-21 Economy Comfort Stalls with divider control and triple bend divider, includes 4' top rail, top rail clamp, stall chain with push in snap, stall chain clamp, and 20" solid shaft in triple bend divider
• CS-21-D stalls come with divider control and double bend divider. Also includes 4' top rail, top rail clamp, stall chain with push in snap, stall chain clamp, 4" column clamp, and 20" solid shaft in triple bend divider

Freudenthal CS-20 Comfort Stall

• CS-20 Super Economy Stall provides maximum comfort and greater freedom. They are constructed of our 1 5/8" 10 gauge triple coated galvanized steel with rigid polyethylene rust shields on all pipes that are cemented in. There is also a 20" solid shaft in triple bend divider. Note: Solid shaft in front post is optional
• CS-20 Economy Comfort Stalls include 4' top rail, top rail clamp, stall chain with push in snap, stall chain clamp, and 20" solid shaft in triple bend divider
• CS-20-D Economy Comfort Stalls come complete with double bend divider. Includes 4' top rail, top rail clamp, stall chain with push in snap, stall chain clamp, and 4" column clamp