Patz 1608 Trough Slider-Bed Belt Conveyor

• Overall Lengths: 10' to 200'
• Span: Up to 20 ft.
• Floor Supports: Note: Support is required at each end of conveyor and at each section joint
• Drive Unit: Direct drive through a speed reducer
• Belt Width: 16 in.
• Belt Surface: Smooth or textured interwoven polyester impregnated with polyvinyl chloride (PVC). Other belts available upon request
• Speed: 390 FPM, 260 FPM, depending on drive selected.
• Assembly: Equipment supplied partially assembled for shipping purposes, additional field assembly required
• Drive Motor: 1 to 3 HP, 1 Ph. or 3 Ph. electric motor drive; hydraulic motor drive also available
• 3 HP or 5 HP, 1 Ph. or 3 Ph. electric motor drive.
  Motor mounts top or bottom
• Recommended Use: Grains, sawdust, forages, chips and many other bulky materials

Patz 2405/2410 Trough Slider-Bed Belt Conveyors

• Open pan design provides trough for extra capacity and reduces belt friction for lower power requirements
• Return wheels carry belt on return bottom to reduce friction for longer belt life and less strain on the drive system
• Covers available to protect material and conveyor from wind, rain, and other contaminants
• Bearings are precision, long-life, sealed, and greaseable for trouble-free, continuous duty
• High gloss polyester powder coated steel, bolt-together conveyor sections resist rust
• The rugged, formed frame is heavy-gauge steel for durability
• Convenient adjustment for belt tension and tracking

Patz 3605 Trough Slider-Bed Belt Conveyor

• Overall Lengths: 10' to 120' in 10' increments
• Maximum length of individual bed section is 10'; modular sections bolt together for lengths beyond 10'
• Frame: Concave open bed, formed 14 ga. high gloss polyester powder coated steel; 6-1/2" depth; 38-3/4" width
• Belt Width: 36"
• Belt: None standard; order as optional equipment
• Belt Speed: 370 ft/min, 260 ft/min, 130 ft/min, or 65 ft/min, depending on drive selected
• Drive Pulley: 5" dia., crowned, steel, rubber lagged
• Tail Pulley: 5" dia., finned, steel
• Bearings: Long-life, sealed, prelubricated, greaseable
• Belt Take-up: Screw-type take-up at tail pulley
• Drive Motor: None standard; order as optional equipment
• Drive Mount: None standard; order as optional equipment
• Load Capacity: Up to 440 ft³/min; 3,700 lb./min; or 800 lb. on conveyor
• Span: Up to 20' between supports
• Electrical Controls: Customer supplied, except optional equipment
• Assembly: Conveyor supplied unassembled

Patz 8912 Trough Slider-Bed Belt Conveyor

• Open pan design provides trough for extra capacity and reduces belt friction for lower power requirements
• Return wheels carry belt on return bottom to reduce friction for longer belt life and less strain on the drive system
• Bearings are precision, long-life, sealed, and greaseable for trouble-free, continuous duty
• High gloss polyester powder coated steel, bolt-together conveyor sections resist rust
• The rugged, formed frame is heavy-gauge steel for durability
• Convenient adjustment for belt tension and tracking

Patz 8916 Trough Slider-Bed Belt Conveyor

• Overall Lengths: 10' to 120' in 10' increments
• Maximum length of individual bed section is 10'; modular sections bolt together for lengths beyond 10'
• Frame: Concave open bed, formed 16 ga. high gloss polyester powder coated steel; 6-1/2"; depth; 17-1/8" width
• Belt Width: 16"
• Belt: None standard; order as optional equipment
• Belt Speed: 370 ft/min, 260 ft/min, 130 ft/min, or 65 ft/min, depending on drive selected
• Drive Pulley: 5" dia., crowned, steel, rubber lagged
• Tail Pulley: 5" dia., finned, steel
• Bearings: Long-life, sealed, prelubricated, greaseable. 1-1/4" bearing on idler and drive end
• Belt Take-up: Screw-type take-up at tail pulley
• Drive Motor: None standard; order as optional equipment
• Drive Mount: None standard; order as optional equipment
• Load Capacity: Up to 90 ft³/min; 3,700 lb/min
• Span: Up to 20' between supports
• Color: Blue high gloss polyester powder coat